Новости | HACOTECH

News

New to our product range: Prepregs

October 2010

We are happy to be able to present you our new prepreg range. The various prepregs (low- to hightemperature prepreg) can be manufactured in different material combinations with our standard fabric typres (glass fabric, carbon fabric) according to customers' request.

Particularly noteworthy is the HACOPREG LTP180 a lowtemperature prepreg, which can already be cured at 45°C and can reach a TG of 180°C after demoulding through post-curing.

Further information, especially regarding the possible material combinations can be found here.

New to our product range: TPone - a thermoplastic prepreg

June 2010

TPone is a fibre-reinforced thermoplastic cover, a so called thermoplastic prepreg, which is fabricated in a continous, automated manufacturing process suitable for large-batch production by the fiber work GmbH. Due to it's diverse combination possibilities of matrix and reinforced fibres it can fulfil a broad range of applications and is characterised by outstanding mechanical properties at low weight.

We are fiber work GmbH's exclusive distributor for this product and we are available for application-specific questions. We can also give you an individual quote, made for your requirements. Feel free to contact us!

For more detailled information on TPone we would like to refer to the flyer as well as the website.

Advancement of the HACOPEEL product line

February 2010

HACOPEEL-X3 is an advancement of the already established HACOPEEL-X2. Both fabric types are a combination of peel ply, perforated foil and suction fleece, which lead to considerably more effective working hours in the vacuum bagging process.

Compared with HACOPEEL-X2, HACOPEEL-X3 distinguishes itself by leaving behind a rough surface on the component after being removed, on which one can immediately laminate or glue.

Customer presentation / Introdution of the ATC products

December 2009

ATC In the course of a customer presentation on the 10 december 2009 we introduced a new development of the Canadian company ATC Formulated Polymers Inc., to whom we act as retailing partner. Poly-Fair T28 is a shapeable polyester paste, which is used to produce models and moulds. It distinguishes itself through easy processing, a high fault tolerance and comparably low investments in the manufacturing equipment.

For many years ATC has been formulating high-class, polyester resin based products, which until now have primarily been used in yacht construction. It is our goal, to -next to yacht construction- open up other industries, as the products also offer utilizable benefits for other application areas.

Vacuum infusion Rhepro 21

Oktober 2009

During the course of a youth support project of the sailing club RHE e.V. we produced the hull for the self-developed hightech sailing yacht Rhepro 21, with a length of 6,40m via vacuum infusion. HACOTECH was responsible for the organistaion and practical application of the vacuum infusion. The hull is a sandwich construction which consists of PVC foam, glass fabrics and epoxy resin. After an infusion of only 60 minutes the hull was fully soaked.

Vacuum foils

September 2009

With immediate effect we deliver vacuum foils up to 12 m in un-welded quality. These foils are particularly suitable for boatbuilding and rotor blade manufacturing.

HACOPOX Epoxifuge

Juli 2009

We´ve expanded our product range!
HACOPOX Epoxifuge is an innovative joint sealant, which is made of quartz sand in combination with epoxy resin and curing agent. It is used for permanent, water permeable joint sealing of natural stone, bricks, concrete block and tiling. Both interior and exterior use is possible, whereby it prevents washouts as well as weed infestations.

We offer HACOPOX Epoxifuge in 25 kg bundles(25 kg quartz sand + resin + curing agent). HACOPOX Epoxifuge is available in different grain sizes and colours

HACOPEEL-X2