We look forward to your visit on facebook.
For an economic production in the vacuum bagging or vacuum infusion procedure efficient yet affordable foils are needed. Hot or cold perforated foils allow the resin to flow evenly and enable an easier seperation of the flow promoter after the infusion and/or the absorbent fleece after the vacuum bagging.
Tearproof and elastic vacuum foils up to 12m in width guarantee a fast and accurate creation of the required vacuum.
Below you can find our standard range of foils.
We are looking forward to give you a special offer for your individual needs!
|max. proc.temp. |
|Roll length |
|Release and perforated film|
|RFA005-1000||Release film, PTFE (supported with glass fabric), self adhesive||113||260||1000||16,5|
|VFL500-50 div.Breiten||Multi-layer vacuum foil (unwelded)||50||171|| |
|VFL100-75 div.Breiten||Multi-layer vacuum foil (unwelded)||75||121||3000 |
|VFL540-50 div.Breiten||Nylon vacuum foil||50||177||1220 |
|VFL740-50 div.Breiten||Nylon vacuum foil, heat-stabilised||50||204||1370 |
|Vacuum foil in tube form|
|VFL540-50 LFT||Nylon bagging film in tube form||50||177||several (please refer data sheet)||several (please refer data sheet)|
|VFL540-75 LFT||Nylon bagging film in tube form||75||177||several (please refer data sheet)||several (please refer data sheet)|
|VFL740-50 LFT||Nylon bagging film in tube form, heat stabilised||50||204||several (please refer data sheet)||several (please refer data sheet)|
|HACOSIL SF501||Silicon film unvernetzt, 40° Shore A||1,5 mm||200||400|